5
• The units use industry standard Weiland plug
and sockets for connecting luminaries.
• The C-Bus Marshalling Box is designed in two
sections for simple (fi rst /second fi x) installations.
• No tools are required at second fi x stage to
connect luminaire to the Marshalling Box. They
are simply plugged in, saving time and labour.
• A full range of Intelligent C-Bus Marshalling
Boxes are available to control switched
relay outputs, 0-10V d.c. outputs, DSI outputs
(for control of Tridonic DSI dimmable ballasts).
• The Marshalling Box Range are C-Bus devices
that connect directly to the Clipsal C-Bus Control
and Management system.
• Fully programmable devices that can be
controlled via other C-Bus devices or C-Bus
Software Packages.
• 9 output connections (8 controllable channels,
i.e. channel 8 and 9 controlled in parallel)
on each unit to match typical 3 x 3 lighting
schemes.
• Normally energised Emergency Lighting output
on each channel. This can be controlled via
C-Bus for testing emergency lighting battery packs.
• Ultra-low profi le for areas where limited ceiling
(plenum) space in available.
• The Marshalling Boxes can be wired to the
C-Bus network in any topology for ease of
installation, as C-Bus utilizes a free topology
structure.
• 4 C-Bus control cable connection sockets (RJ45)
are included on each Marshalling Box for easy
connectivity for C-Bus Movement Sensors, Light
Level Sensors, Switches, Infrared receivers, etc.
Benefi ts of the Clipsal
Marshalling Box Range
Comments to this Manuals