Daewoo DF-8150 User Manual download pdf (Page 60)

EDITING REFERENCE

59

Check the following guide for the possible cause of a problem before contacting customer support.

No power.

No picture.

No sound.

Playback picture is poor.

DVD Recorder+VCR does

not start playback.

Picture from external

input is distorted.

Some channels are skipped

over when using [PR+/–].

Picture or sound of

broadcasting channel is

weak or missing.

Camcorder image not

shown.

(DF-8100P/8150P only)

Camcorder image via A/V

input to DVD Recorder+

VCR is not shown on TV

screen.

Can’t play disc recorded

on this DVD

Recorder+VCR on another

DVD player.

The power cord is disconnected.

The TV is not set to receive DVD

Recorder+VCR signal output.

The video cable is not connected

securely.

The TV power is turned off.

The equipment connected with the

audio cable is not set to receive DVD

Recorder+VCR signal output.

The audio cables are not connected

securely.

The power on the equipment

connected with the audio cable is

turned off.

The audio cables are damaged.

The disc is dirty.

Tape heads are dirty.

Tape is a rental or was recorded on

another VCR.

No disc is inserted. No tape is

inserted.

An unplayable disc is inserted.

The disc is placed upside down.

The disc is not placed within the

guide.

The disc is dirty.

The Parental Control level is set.

The video signal from the external

component is copy-protected.

The skipped channels were deleted

with the ‘Adjust Channels’ feature.

Antenna or cables are loose.

Wrong Tuning Band is selected in the

DVD Recorder+VCR Setup menu.

Camcorder is off.

DVD Recorder+VCR’s source is not set

to AV1, AV2, AVF, or DV.

(DV : DF-8100P/8150P only)

The disc was not finalized (or not made

compatible if using a DVD+RW).

Some players will not play even a

finalized disc.

Plug the power cord into the wall outlet

securely.

Select the appropriate video input on the

TV so the picture from the DVD

Recorder+VCR appears on the TV screen.

Connect the video cable securely.

Turn on the TV.

Select the correct input mode on the audio

receiver so you can listen to the sound

from the DVD Recorder+VCR.

Connect the audio cables securely.

Turn on the equipment connected with the

audio cable.

Replace with new ones.

Clean the disc.

Clean the video heads.

Use [Tracking +/–] for manual tracking

adjustment while a tape is playing.

Insert a disc or tape. (Check that the disc

indicator on the front panel display is lit.)

Insert a playable disc. (Check the disc

type, color system, and regional code.)

Place the disc with the playback side

down.

Place the disc on the disc tray correctly

inside the guide.

Clean the disc.

Cancel the Parental Control function or

change the rating level.

You cannot connect via the DVD

Recorder+VCR. Connect the component

directly to your TV.

Use the ‘Adjust Channels’ feature to

restore channels.

Tighten connections or replace cable.

Try all ‘Auto Set‘ options; see page 23 for

details.

Turn camcorder on and operate properly.

Use [INPUT] to select AV input channel

(AV1, AV2, AVF, or DV).

Finalize the disc; see page 53.

No solution.

Troubleshooting

Troubleshooting

Symptom Cause Solution

DF-L71D1P-UA/TA 04.11.24 11:52 PM 페이지59

Downloaded from www.Manualslib.com manuals search engine

Downloaded From Disc-Player.com Daewoo Manuals

1 2 ... 55 56 57 58 59 60 61 62 63 64

Comments to this Manuals

No comments