Daewoo DF-8150 User Manual download pdf (Page 51)

You can record from an external component, such as a camcorder or VCR, connected to any of the DVD

Recorder+VCR’s external inputs.

Make sure the component you want to record from is connected properly to the DVD Recorder+VCR; see pages

15~18.

2 Use [PR+/–] or [INPUT] to select the external input to record from.

3 Load a recordable disc or tape.

4 Set the desired Recording mode by pressing [REC SPEED] repeatedly.

DVD: HQ (High Quality - 1 hr/disc), SP (Standard Play - 2 hrs/disc), EP (Extended Play - 4 hrs/disc), or SLP

(Super Long Play - 6 hrs/disc).

VCR: SP (Standard Play), LP (Long Play - 2 times SP)

5 Press [REC (●)] once.

Recording will start. The REC indicator lights on the front panel display.

Recording continues until you press [STOP] or the disc is full.

To record for a fixed length of time, see ‘One Touch Record‘ on page 44.

6 Press [STOP (■)] to stop recording.

Recording from External Components

Note

• If your source is copy-protected, you will not be able to record it using the DVD Recorder+VCR. See ‘Copyright

Notice‘ on page 8 for more details.

Recording from an External Input

You can record from a digital camcorder connected to the DV IN jack on the front panel of the DVD

Recorder+VCR.

You can use the DVD Recorder+VCR remote to control both the camcorder and the DVD Recorder+VCR. Before

recording, make sure the digital camcorder is properly connected to the front panel DV IN jack; see page 18.

1 Make sure your digital camcorder is connected to the front panel DV IN jack; see page 18.

2 Press [INPUT] repeatedly to select the DV input.

DV appears on the front panel display and the TV screen.

3 Find the place on the camcorder tape from which you want to start recording.

For best results, pause playback at the point you want to start recording. Depending on your camcorder, you

can use the DVD Recorder+VCR remote to control the camcorder using the STOP, PLAY, and PAUSE

functions.

4 Press [REC] once to start recording.

Recording is automatically stopped if the DVD Recorder+VCR detects no signal. You can pause or stop the

recording by pressing [PLAY/PAUSE] or [STOP]. You cannot control the camcorder from the remote control

during recording.

Recording from a Digital Camcorder

The source signal must be DVC SD format.

Some camcorders cannot be controlled using the DVD Recorder+VCR remote.

If you connect a second DVD recorder using a DV cable, you cannot control the second recorder from this one.

You cannot control the DVD Recorder+VCR remotely from a component connected to the DV IN jack.

You cannot record date and time information from a DV cassette.

DF-8100P/8150P only

DF-L71D1P-UA/TA 04.11.24 11:51 PM 페이지50

Downloaded from www.Manualslib.com manuals search engine

Downloaded From Disc-Player.com Daewoo Manuals

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 63 64

Comments to this Manuals

No comments

Daewoo DF-8150 User Manual Page 51

Comments to this Manuals

Related products and manuals for DVD players Daewoo DF-8150