Daewoo KOR-86FB Operations Instructions Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 27
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
6
Plug power supply cord into 230~240V AC
50Hz power outlet.
After placing the food in a suitable container,
open the oven door and put it on the glass
tray. The glass tray and roller guide must
always be in place during cooking.
Close the door. Make sure that it is firmly
closed.
The oven door can be opened at any time
during operation by pushing the door open
button. The oven will automatically shut off.
To restart the oven, close the door and then
touch the START pad.
The oven automatically cooks on full power
unless set to a lower power level.
The display will show “ : 0” when the oven is
plugged in.
Time clock returns to the present time when the
cooking time ends.
When the STOP/CLEAR pad is touched during
the oven operation, the oven stops cooking and
all information retained. To erase all
information(except the present time), touch the
STOP/CLEAR pad once more.
If the oven door is opened during the oven
operation, all information is retained.
If the START pad is touched and the oven does
not operate, check the area between the door
and door seal for obstructions and make sure
the door is closed securely. The oven will not
start cooking until the door is completely closed
or the program has been reset.
OPERATION PROCEDURE
This section includes useful information about oven operation.
1
2
3
4
5
6
7
8
9
Make sure the oven is properly installed and
plugged into the electrical outlet.
WATTAGE OUTPUT CHART
The power-level is set by touch the POWER pad. The chart shows the display, the power level and the
percentage of power.
Touch the Power pad Power level (Display) Approximate Percentage of Power
once P-HI 100%
twice P-90 90%
3 times P-80 80%
4 times P-70 70%
5 times P-60 60%
6 times P-50 50%
7 times P-40 40%
8 times P-30 30%
9 times P-20 20%
10 times P-10 10%
11 times P-00 0%
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 26 27

Comments to this Manuals

No comments