Daewoo SF-7200D Specifications download pdf (Page 18)

VCR Operation

34 35

More Functions

■ The player machine records the complete sound signal transmitted by the TV station.

■ On the mono VCR, you will hear the normal mono sound.

In addition to the normal mono sound track of VHS video recorders, your player machine is equipped with a

high-quality Hi-Fi sound system.

This means you can enjoy

• films with excellent stereo sound

• films of full-length concerts in high quality stereo

• films with impressive Surround Sound using additional Surround equipment

• films with two dialogue modes (dual, bilingual), usually the original sound track and dubbed sound track

• VHS cassettes with Hi-Fi stereo sound and VHS cassette with normal sound

During Stop, the player displays what the current station is broadcasting. When

you switch to another station or the current station changes the sound mode, your

player displays the programme and sound mode on screen (if not, press AUDIO).

• “STEREO” = stereo

“BIL I / BIL II ”=bilingual

nothing= monaural sound

During Playback, the player displays what is recorded on

the cassette (if not, press AUDIO).

• “Hi-Fi” = stereo/bilingual

nothing = monaural sound

STOP SP PR10 EURO

STEREO ON

PLAY SP Hi-Fi

L+R

During a stereo performance (playback-”Hi-Fi”/ broadcast

- “STEREO”):

Hi-Fi stereo

➝

left audio channel only

➝

right channel

only

➝

the normal mono sound track of a Hi-Fi cassette

• During broadcasting a bilingual performance : Main

language (original sound track)

➝

sub-language

(dubbed)

➝

both main language and sub-language.

• For mono performances , there is no choice available.

PLAY SP Hi-Fi

L+R

HI-Fi

LEFT

Hi-Fi

RIGHT

Hi-Fi

OFF

The Hi-Fi system

What you can listen to

Choice of sound output

Connections and Assembling

■ If you are using a RCA cable, select the AV input on the TV to see the picture from the player.

■ If you are not using a RCA cable, select the button number on the TV reserved for video input to

see the picture from the player.

If you are not using a RCA cable, your player can transmit pictures and sound to the TV via the coax aerial

cable. Just tune the TV to the player's transmitting channel (factory set to UHF CH52). Tune the TV carefully to

ensure the best pictures and sound.

Once you have carried out the steps in "Connecting up your player

with RF lead" , switch on your TV.

Press the [OK/ENTER] button of the player’s remote control longer

than 5 seconds to call the player´s test picture.

Tune the TV to the test picture using the channel pre-set functions of

your TV as described in its manual.

When you have found the test picture, store it under the button

number on your TV for player input.

Press the [OK/ENTER] button of the player’s remote control again

longer than 5 seconds to release the test picture.

• If the quality of the test picture transmitted to the TV is poor due

to interference caused by a station transmitting on channel 52,

you can tune the player to a different transmitting channel. Find

a free channel between 21 and 69 on your TV.

Call the player’s "SETUP" choose "VCR SETUP" then "RF

OUTPUT SET".

Type in the free channel.

Store and exit.

• If the quality of the test picture transmitted to the TV is poor, fine-tuning on the TV

may help (refer to the TV manual).

• Without a RCA cable, you will not get stereo sound from a TV capable of stereo sound.

To the TV via antenna cable (if you are not using a RCA cable)

STOP SP PR10 EURO

BIL

I+II

RF OUTPUT SET

0-9:SELECT (21-69)

/➝:SELECT (BG/DK)

OK:CONFIRM SETUP:END

CH 52

SYSTEM BG DK

➝

Downloaded from www.Manualslib.com manuals search engine

Downloaded From Disc-Player.com Daewoo Manuals

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Comments to this Manuals

No comments

Daewoo SF-7200D Specifications Page 18

Comments to this Manuals

Related products and manuals for DVD players Daewoo SF-7200D