Daewoo SF-7200D Specifications download pdf (Page 10)

Basic Operation

18 19

Initial Installation

Setting up the player

■ Switch the TV on.

■ You can also start "AUTO SEARCH" in the SETUP "PR PRESET"

➝

"AUTO SEARCH".

■ To tune in new stations (manual tuning) and to enter station names see page 27-28.

SETUP:END

PLEASE WAIT...

CH 25

You should see this picture the first time you switch on the TV

and player.

Select the wanted language with PR+ or PR- button. Press OK to

confirm.

Press on the remote control and RF52 will be displayed on

the front of your player.

Select a free channel on your TV and manual tune the channel

until the blue screen as shown in step 2 appears. Refer to the TV

manual for more details.

OK for "AUTO SEARCH!".

"AUTO SEARCH" tunes in all the stations you can receive in your

country.

• If you don't see the menu picture below after you press the menu button it may be because you

don't use a RCA cable and you need to tune the television to the player (see 'Connecting your

player through RF lead' on page 12). Normally a new player outputs a signal via the RF lead on

transmission channel 52. Search for the menu picture with the channel tuning function of your TV

set (see its user manual). Some televisions allow you to key in the transmission channel number in

their tuning set-up menu.

• In case there will be interference problems with other transmission channels when the player

outputs a signal on transmission channel 52, the AUTO SEARCH process usually recommends an

alternative, as in step 4.

• There is a another way of setting RF output channel, if needed please see 'Connections and

Assembling on page 35'. It does not apply to models which do not generate the RF output signal.

CHECK IT!

Press the [OK] button to confirm the recommended RF channel.

Should you wish the stations to have the same numbers as those

used on the TV, follow the instructions in "Sorting programme

locations" on page 29.

Else ...

exit the basic installation function and enjoy your player.

Should you wish the stations to have the same numbers as those

used on the TV, follow the instructions in "Sorting programme

locations" on page 29.

Else ...

Press the SETUP button to exit the set-up menu and enjoy your

player

PLEASE CHANGE THE TV

CH TO 54.

IMPORTANT!

If other stations are positioned on near the current RF OUTPUT

CH, the guide message appears automatically.

The player recommends the optimal RF OUTPUT CH number

automatically.

• If the signal from the player is coming into the TV through

the RF lead, the picture will disappear when you press OK

at step 7. You will need to re-tune your television to the new

UHF transmission channel.

MANUAL SET

PR01 P-01 PR08 P-08

PR02 P-02 PR09 P-09

PR03 P-03 PR10 P-10

PR04 P-04 PR11 P-11

PR05 P-05 PR12 ----

PR06 P-06 PR13 ----

PR07 P-07 PR14 ----

PR+/-:SELECT

OK:CONFIRM SETUP:END

Up [PR+], down [PR-], OK and 'confirm'

• Notice the on-screen prompts which the video recorder generates to tell you which button to press. In general

the up and down 'navigation' buttons select or highlight something and the OK button confirms it .

• [PR+] and [PR-] are the same buttons as 'up' and 'down'.

• In the DVD section it is usually the left and right buttons which 'select'.

LANGUAGE SET

ENGLISH

PYCCKNZ

ÔESKY

MAGYAR

PR+/-:SELECT

OK:CONFIRM SETUP:END

If the clock has not been set, the clock setting screen will appear.

Please see “Setting time and date” on page 20.

CLOCK SET

0-9:SETUP (HOUR)

/➝:CORRECT SETUP:END

TIME - - : - -

DATE - - / - - /- - - -

➝

RF OUTPUT SET

0-9:SELECT(21-69)

OK:CONFIRM SETUP:END

CURRENT CH 52

RECOMMENDED CH 54

Downloaded from www.Manualslib.com manuals search engine

Downloaded From Disc-Player.com Daewoo Manuals

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comments to this Manuals

No comments

Daewoo SF-7200D Specifications Page 10

Comments to this Manuals

Related products and manuals for DVD players Daewoo SF-7200D