Daewoo DV-500 Instruction Manual Page 45

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 44
45
DISPLAY
ENTER
Memory
Move
Select
Off 1 2 3
Check
Adjusting the picture quality settings
To create your own setting (2)
1 Use the cursor button (3) to select [Start] then press
ENTER.
Memory
Fine Focus
Contrast
Sharpness
Chroma Level
Hue
On
Off
soft fine
min max
min max
green red
Off 1 2 3
Interlace Video Memory Select
Interlace Video Setup
5 Use the cursor buttons (2/3) to adjust the settings.
Adjust these while a disc is playing to see the effect of changes
immediately.
6 Repeat steps 4 and 5 to make adjustments to other
settings.
If you would like to save the settings in the players memory, be
sure to select either [1], [2], or [3] in the [Memory] setting to
establish which memory location to save the new settings in.
Please note that if you select a location where settings have
already been saved, the old settings will be replaced by the new
ones.
2 Use the cursor button () to select [Video Setup] and press
ENTER.
3 Press DISPLAY.
4 Use the cursor buttons (5/) to select the setting and use
the cursor buttons (2/3) to adjust the settings.
Adjust these while a disc is playing to see the effect of changes
immediately.
5 To memorize the setting, select Memory 1, 2, 3, then press
ENTER.
The previous setting will be erased.
7 When you are finished making adjustments, press ENTER
to establish the new settings.
Page view 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 59 60

Comments to this Manuals

No comments