Daewoo DUB-2850 Operations Instructions download pdf (Page 8)

Remark: The side S-VIDEO jack (B9) and the VIDEO socket (B10) does not connect at the same time.

NORMAL

OK/SELECT GUIDE

CONNECTING EXTERNAL EQUIPMENT

The rear Scart1 (C1), Scart2 (C2) sockets, the front AV socket (B10) (B11 and B12), and the S-VHS socket (B9) are three dedicated sockets to

connect audio-video equipment.

Rear

REAR SCART 1 SOCKET (AV1)

This socket (C1) has video / audio inputs and outputs. Ouput is RF analogue signal.

It is recommended to connect to this socket automatic AV switching equipment

such as pay-TV decoders, video games, DVD players and most VCR’s.

In most cases, when connecting powered equipment to this socket, the TV

set switches automatically to AV mode. If not, then use the TV/AV buttons

(A4) or (B8) to select AV1.

REAR SCART 2 SOCKET (AV2)

This socket (C2) has video / audio inputs and outputs. Ouput is RF digital signal.

Automatic AV switching equipment(for example most VCR’s) can be connected to

this socket.

In most cases, when connecting powered equipment to this socket, the TV

set switches automatically to AV mode. If not, then use the TV/AV buttons

(A4) or (B8) to select AV2.

You can also receive an S-VHS signal with REAR SCART2 socket, by

selecting SVHS2 with the TV / AV buttons (A4) or (B8).

VCR / DVD / Video Game / Pay-TV decoder Important:

If your video equipment does not have SCART socket(s), or

if you wish to use only the aerial (RF) connection (not

recommended), then you should make use of PR 00 on the

TV set for best performance.

TV/AV SELECTION

Allows to switch between TV and external modes.

By repeatedly pressing the remote control TV / AV (A4) or the TV front panel TV /

AV (B8) button, the on-screen display is changed as shown (SVHS3 is an option):

AV1

AV2 SVHS2 AV3 SVHS3 TV

Remark: If the signal source from the rear SCART1 socket (AV1) is RGB

(e.g. normally from a DVD player) then AV1 RGB will be displayed.

SIDE AV SOCKET (AV3)

The side AV socket (B10) - (B11 and

B12) has audio and video inputs. To

switch from TV to these inputs,

use the TV / AV buttons (A4) or

(B8) and select AV3.

SIDE S-VIDEO JACK

The side S-VIDEO jack (B9) has video inputs only.

It is necessary to connect the audio inputs to socket (B11 and

B12) in order to have audio and video. To switch from TV to

these inputs, use the TV / AV buttons (A4) or (B8) and

select SVHS3.

Side

CAMCORDER

VIDEO GAME

HEADPHONE SOCKET

To hear TV sound with

headphones, insert a

3.5mm headphone plug

into the headphone

socket (B13). The

speaker’s sound will be

automatically cut oﬀ.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Comments to this Manuals

No comments

Daewoo DUB-2850 Operations Instructions Page 8

Comments to this Manuals

Related products and manuals for CRT TVs Daewoo DUB-2850