Daewoo SD-8800P Owner's Manual download pdf (Page 11)

Initial Installation

Setting up the player

■ Switch the TV on.

■ You can also start "AUTO SET" in the SETUP "PR PRESET" "AUTO SET".

■ To tune in new stations (manual tuning) and enter station names see page 25-26.

SETUP:END

PLEASE WAIT...

CH 25

RF OUTPUT SET

0-9:SELECT(21-69)

OK:CONFIRM SETUP:END

CURRENT CH 52

RECOMMENDED CH 54

You should see this picture the first time you switch on the TV

and player.

OK for "AUTO SET!".

"AUTO SET" tunes in all the stations you can receive in your

country and sorts them in an order common for your country.

Clock is automatically set.

If other stations are positioned on near the current RF OUTPUT

CH, the guide message appears automatically.

The player recommends the optimal RF OUTPUT CH number

automatically.

Press the [OK] button to confirm the recommended PR.

Should you wish the stations to have the same numbers as those

used on the TV, follow the instructions in "Sorting programme

locations" on page 26.

Otherwise ...

exit the basic installation function and enjoy your player.

PLEASE CHANGE THE TV

CH TO 54.

IMPORTANT!

MANUAL SET

PR01 BBC1 PR08 SKYS

PR02 BBC2 PR09 MTVE

PR03 ITV PR10 P-10

PR04 CHA4 PR11 P-11

PR05 SKY1 PR12 ----

PR06 SKYN PR13 ----

PR07 SKYM PR14 ----

PR+/-:SELECT

OK:CONFIRM SETUP:END

• If you don´t see this picture, because you don´t use a SCART cable,

search this picture now (CH 52) with the station tuning functions of

your TV set (see its user manual).

• In case of interference problems on CH 52, type in an

other transmission channel between 21 and 69 using

the number buttons.

But use the optimum CH number first!

OK:CONFIRM SETUP:END

AUTO SET

Basic Operation

■ Press [VCR] button on the remote control to change into VCR Mode and follow the procedure

below.

Call the player’s "SETUP",

choose "VCR SETUP", then "CLOCK SET".

Move to the position you want to change and type in the

new values.

Wait a few seconds after typing a one-digit number.

Store with [OK] button and exit with [SETUP] button.

CLOCK SET

0-9:SETUP (HOUR)

</>:CORRECT SETUP:END

TIME - - : - -

DATE - - / - - /- - - -

CLOCK SET

0-9:SETUP (HOUR)

</>:CORRECT

OK:CONFIRM SETUP:END

TIME 06:05

DATE 08/06/2003(SUN)

Setting time and date

Setting time and date / Auto clock

■ Auto Clock is only available for models with the VPS/PDC function (see page 27).

Some broadcasting stations may send the time and date along with the VPS/PDC data. The video will

automatically use this time and date during the initial setting up procedure during normal use, and

every time you switch the video off at the mains. If you find that this time and date is incorrect you can

remove this feature by following the steps below changing it to the OFF mode, you will then have to

manually set the time and date, see above.

AUTO CLOCK

OFF

PR+/-:SELECT

OK:CONFIRM SETUP:END

Setting Auto clock

VCR SETUP

CLOCK SET

RF OUTPUT SET

16:9 SET

OSD ON/OFF

AUTO CLOCK

PR+/-:SELECT

OK:CONFIRM SETUP:END

Downloaded from www.Manualslib.com manuals search engine

Downloaded From Disc-Player.com Daewoo Manuals

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

Comments to this Manuals

No comments

Daewoo SD-8800P Owner's Manual Page 11

Comments to this Manuals

Related products and manuals for DVD players Daewoo SD-8800P