Daewoo 719BF Service Manual download pdf (Page 10)

Pin Signal

1 Red

2 Green

3 Blue

4 GND

5 GND

6 GND - Red

7 GND - Green

8 GND - Blue

9 +5Vdc

10 GND - H.Sync

11 GND - V.Sync

12 Bi-directional Data (SDA)

13 Horizontal Sync

14 Vertical Sync (VCLK)

15 Data Clock (SCL)

PIN CONNECTOR

• Degaussing is always required when adjusting purity or convergence.

• The white balance adjustment has been done by a color analyzer in factroy. The adjustment procedure,

described in the service manual is made by a visual check.

• Allow 20 minutes warm-up time for the display before checking or adjusting only electrical

specification or function.

• Reform the leadwire after any repair work.

◆ Caution For Servicing

• In case of servicing or replacing CRT, high voltage sometimes remains in the anode of the CRT.

Completely discharge high voltage before servicing or replacing CRT to prevent a shock to the

serviceman.

Arrangement of 15-pin D-sub connector

CAUTIONS FOR ADJUSTMENT AND REPAIR

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 51 52

No comments

Daewoo 719BF Service Manual Page 10