Daewoo DF-4700PN User Manual download pdf (Page 55)

54

Check the following guide for the possible cause of a problem before contacting customer support.

Symptom Cause Solution

Plug the power cord into the wall outlet

securely.

Select the appropriate video input on the TV

so the picture from the DVD Recorder +

VCR appears on the TV screen.

Connect the video cable securely.

Turn on the TV.

Select the correct input mode on the audio

receiver so you can listen to the sound from

the DVD Recorder + VCR if not using the

TV speakers.

Connect the audio cables securely.

Turn on the equipment connected with the

audio cable.

Replace with new ones.

Clean the disc.

Clean the video heads.

Use [Tracking +/–] for manual tracking

adjustment while a tape is playing.

Insert a disc or tape. (Check that the disc

indicator on the front panel display is lit.)

Insert a playable disc. (Check the disc type,

colour system, and regional code.)

Place the disc with the playback side down.

Place the disc on the disc tray correctly

inside the guide.

Clean the disc.

Cancel the Parental Control function or

change the rating level.

You cannot connect via the DVD Recorder +

VCR. Connect the component

directly to your TV.

Use the ‘Adjust Channels’ feature to restore

channels.

Tighten connections or replace cable.

Try all ‘Auto Set‘ options; see page 21 for

details.

Turn camcorder on and operate properly.

Use [INPUT] to select AV input channel

(AV1, AV2, AVF, or DV).

The power cord is disconnected.

The TV is not set to receive DVD

Recorder + VCR signal output.

The video cable is not connected

securely.

The TV power is turned off.

The equipment connected with the

audio cable is not set to receive DVD

Recorder + VCR signal output.

The audio cables are not connected

securely.

The power on the equipment connected

with the audio cable is turned off.

The audio cables are damaged.

The disc is dirty.

Tape heads are dirty.

Tape is a rental or was recorded on

another VCR.

No disc is inserted. Nor tape is inserted.

An unplayable disc is inserted.

The disc is placed upside down.

The disc is not placed within the guide.

The disc is dirty.

The Parental Control level is set.

The video signal from the external

component is copy-protected.

The skipped channels were deleted

with the ‘Adjust Channels’ feature.

Antenna or cables are loose.

Wrong Tuning Band is selected in the

DVD Recorder + VCR Setup menu.

Camcorder is off.

The DVD Recorder + VCR’s source is

not set to AV1, AV2, AVF, or DV.

(DF-

4501PV only)

No power.

No picture.

No sound.

Playback picture is poor.

DVD Recorder + VCR does

not start playback.

Picture from external input

is distorted.

Some channels are

skipped over when using

[PR+/–].

Picture or sound of

broadcasting channel is

weak or missing.

Camcorder image not

shown.

Camcorder image via A/V

input to DVD Recorder +

VCR is not shown on TV

screen.

Troubleshooting

Troubleshooting

DF-H3512P-UL¿ 2008.1.25 5:21 PM ˘ ` 54 mac001 1200DPI 100LPI

Downloaded From DvDPlayer-Manual.com Daewoo Manuals

1 2 ... 50 51 52 53 54 55 56 57 58

Comments to this Manuals

No comments